AlcoMate Prestige (AL6000) Breathalyzer, FULL Pack

AlcoMate Prestige FAQ

Cleanup & Maintenance

In order to extend the life of your breathalyzer, we recommend the following steps after each breath test:

• Turn off power.
• Blow fresh air into your device. (If possible, you should inhale fresh air into the device rather than using your breath. If you use your breath, make sure there are no contaminants such as food, drink or smoke.)

Important Reminders

The oxide semiconductor sensors used for alcohol detection measure BAC by the buildup of substance on the sensor surface. Because of this, you should avoid the following:

• Wait at least 30 minutes after eating, drinking or smoking before conducting a breath test.
• Some common household products, such as alcohol-based mouthwash, can significantly affect test results. Please allow ample time before testing.
• Some medical conditions, such as diabetes or related internal organ ailments, may affect test results.

What is the BAC (blood alcohol concentration) limit for driving?

The legal limit for BAC while driving varies from state to state across the US, but most states use DUI/DWI limits of 0.08% to 0.10%. For more exact information see our DUI Laws By State page.

Can I drive if my BAC is less than 0.08%?

No, we do not recommend driving with any intake of alcohol. There is no "safe" level of drinking before driving.

What is calibration/recalibration? Why do I need it?

Calibration of breathalyzers involves the manual setting of specific, known laboratory BAC samples against the readings recognized by the device. The AlcoMate Prestige DOES NOT require recalibration.

How do I know if I need recalibration?

If you notice that your breathalyzer is giving incorrect readings (usually a little high), please try the following:

• Inhale fresh air into the device.
• If the reading is 0.00%, the device should be functioning correctly.
• If the reading is above 0.00%, you should send in the unit for recalibration.