Water Analysis Kit-Laboratory The laboratory performs analysis according to US EPA and industry standard methods to meet state compliance requirements. Checks for 143 bacteria, chemicals, metal-mineral and more! as well as performing informational tests for quality control purposes.

Product Home Page Features & Benefits Symptoms & Conditions Instructions Contaminates Process Sample Analysis Other Environment Test Kits Test Medical Symptoms Home Page $149.95/kit 1 kit2 kits3 kits4 kits5 kits6 kits7 kitsCALL US

Laboratory Analysis Instructions

Read all instructions included with the analysis kit. Some sample bottles contain preservatives. Please do not empty or rinse bottles prior to filling them. Fill each bottle carefully...& Only 1 Time.

Download a PDF file of instructions

Bacteria:

• Remove strainer, aerator, or other devices from faucet.
• Disinfect spigot using alcohol. If spigot is metal you may use flame.
• Run water to flush system
• Be careful not to touch the inside of the bottle or cap
• Fill bottle to fill line and cap securely.

Pesticides and Herbicides:

• Fill to neck and cap securely. (Please fill this bottle even if you have not chosen the Pesticide Option. The lab may need the extra water.)

Ice Pack:

• Freeze at least 8 hours, then return to kit just before sampling.

Metals and Physical Factors:

• Fill to neck and cap securely.

THMs & VOCs:

• Adjust water flow to a thin stream.
• Slightly overfill vial so that a "button" of water stands above the rim. Cap Firmly, but do not over tighten.
• Tip vial upside down; if an air bubble has formed in the vial, add more water to displace the bubble.
• Recap and check again.

PLEASE DO NOT WRITE ON THE STYROFOAM, IT IS RECYCLED PACKAGING MATERIAL

*   Same day and next day shipments are normally the case with the exception of any out-of-stock items.
** Lifetime member discounts are subject to member terms & conditions. Also, use of this site & products sales that result from this site are subject to our  company's policies & disclaimers