 |
|
| ||||||||||
|
|
| ||||||||||
EASY TO USE!
No special laboratory facilities required.
Result within 3 to 6 minutes
DIRECTIONS FOR
DETERMINING YOUR BLOOD TYPE
ELDONCARD®2511 for blood typing inside the ABO- and Rhesus-D Systems
This is a single-use test kit. Perform test at room temperature. Avoid any infection. Wash your hands
before and after the blood testing. Do not use any of the accessories coming into contact with the
blood for more than one person.
Read the instruction, collect all materials listed and cut open the bag/envelope.
 |
1. Fill in the EldonCard. Enter information for the person being tested. Do not touch the four rings at the top of the EldonCard. |
 |
2. Prepare the EldonCard. Fill the Water Dropper from the glass of water. Place one water droplet in the center of each of the four rings, without touching the reagent in the rings. |
  |
3. Prepare the Lancet. Remove the colored cap, slowly twisting and pulling until comes loose.The needle will remain hidden. |
  |
4. Pepare fingertip. Soak your ring finger in warm water for 2 minutes to soften the skin. Dry skin and disinfect fingertip with the Disinfectant Wipe. Let dry. Place the tip of the lancet against side of fingertip. Press the Lancet firmly into fingertip to release the short, single-use needle. It will automatically retract after breaking the surface of the skin. |
 |
5. Draw blood. Keep your arm clown for about 10 seconds to stimulate blood flow. Gently press the blood towards the fingertip. Repeat pressing until a droplet forms that is about 1/8 inch in diameter. |
 |
6. Transfer blood droplets to EldonCard. Hold the blood drop above the EldonStick.Take care not to smear the blood on your fingertip. Transfer droplet to the first ring. Place the blood droplet in the center of the ring, where you placed the water droplet. Leave the tip of the EldonStick in the center of the ring. (You will use it to stir the droplet in a moment.) Transfer a blood droplet to each of the remaining three rings, using a new EldonStick for each ring. |
  |
7. Stir and spread. Use each ring's own EldonStick to mix the blood droplet with the water droplet. Spread each blood droplet to completely fill its ring. |
 |
8. Rotate.The blood will begin to interact with the special coating.To make sure the process works, you must tilt and rotate the EldonCard for 40 seconds:
Use the chart to the right to interpret your test results. |
.
|
HOW TO READ YOUR RESULTS |
|
Agglutinates
Each ring's special coating will interact with your red blood cells. Depending
on your blood type, your cells may cluster into a grainy structure called an
"agglutinate" in one or more of the first three rings (Shown Below).
What It Means
The presence or absence of agglutinates tells your blood type. Possible
combinations of agglutinates and the corresponding blood types are shown.
A test producing a weak agglutinate must be repeated.
Invalid Tests
If an agglutinate is seen in the fourth ring (See below), it means your result
is invalid.
You will need a different type of test that requires lab equipment and a
technicians help.
Eldoncards are delivered in moisture proof bags or envelopes. Eldoncards exposed to the air must be used within a working day.
Congratulations! By using this Home Blood Typing Kit, you are taking another step toward making educated and responsible choices about your own health. Carefully follow the simple step-by-step instructions and you will know your blood type within minutes.
|
|
|
*
Same day and next day shipments are normally the case with the exception
of any out-of-stock items. |
|||||||
 |
 |
 |
|
|
     |
  |
Test Medical Symptoms |
|
Copyright 2001-2009 |
Family-Run Business Since 2001 |
Authorized CardioChek Dealer |
Better Business Bureau At Rating |
SSL Secured Checkout |
Payment Types Accepted |
Shipping & Tracking |
|
